Vbar RX only redundancy
29.09.2024 12:07:29
Ripped out my futaba gear and bought a Vbar RX only and oh my god I love it. It's awesome only using my vcontrol now between my helis and plane. I want to get a larger plane and want to include redundancy. On vstabi I can only find redundancy instructions for the vbar neo/evo with gyro. But what if I don't want to use a gyro, for competitions for example? Can I not use 2 x vbar RX only linked for redundancy or can you only do this with the gyro versions only?
Re: Vbar RX only redundancy
30.09.2024 09:24:06
Hi,

afaik, no. RX Only is what the name says.

But I'm actually not sure if you could use a VBar NEO with Extender firmware (or EVO, for the later RX Only based on EVO receiver hardware).
Extender is also what it is, just a servo port and receiver extender.

In fact, VBar NEO or EVO with VBasic firmware is also just a receiver, without stabilization, so perfectly suitable for competition where stabilization is not allowed. But good luck with explaining that to officials who often still seem to be stuck in the 72/35 MHz technological era grinning smiley

—Eddi

Born to fly ...
forced to work.
Re: Vbar RX only redundancy
30.09.2024 10:46:51
Yes, it should do. NEO RX Only and NEO Extender can run in redundant mode. Same for EVO "vbasic" and EVO Extender. EVO is not sold currently as RX Only, but the Firmware can be activated for a regular EVO on an request.

so long ... Uli
http://www.vstabi.de
Re: Vbar RX only redundancy
07.10.2024 10:49:36
Yes it should do?

Meaning I can use 2 x Neo RX only?
What do you mean Neo extender? Vbasic

I have

2 Neo RX only (9 channel)
1 x Neo non Vlink with Vcontrol Satelite



1 mal bearbeitet. Zuletzt am 07.10.2024 11:48 von lucasuk86.
RV
Re: Vbar RX only redundancy
07.10.2024 16:50:15
You can NOT use 2 NEO RX only. You can also NOT use a NEO with external sat, also NOT a EVO with NEO.

The primary device MUST be a NEO RX only 9ch OR NEO VBasic VLink OR NEO VBar (can be flashed with VBasic upon request) VLink.

The secondary one MUST be able to be flashed with the VExtender Firmware - which requires a NEO VBasic VLink or NEO VBar VLink (self-enable in store)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




1 mal bearbeitet. Zuletzt am 07.10.2024 16:53 von RV.
Re: Vbar RX only redundancy
07.10.2024 16:52:18
Sorry, in diesem Forum dürfen nur registrierte Benutzer schreiben.

Hier klicken um Dich einzuloggen- Click here to login