Help - Setting up Crow and Flaperons in Vplane

Hello
I am new to Vbar, helicopter set up is perfect.

I have installed Vplane on my Glider. Successfully set up Crow on switch 3 with two rates and set up Flaperons on switch 4 with two rates using the Macrocells. Switch 2 gives me two rates on the gain.

Questions:
How do I set it up so switches 3 and 4 do not interfere with each other (if moved to the centre or lower positions)? eg. so if switch 3 is in the centre or lower positions, switch 4 becomes disabled / non-functional and visa versa.

Is it possible to adjust the delay / servo speed for the ailerons and flaps when using crow, but only when going to the crow position (not the aileron speed ).

I can zip and attach my Macrocell and setting files and send if that helps, plus I have the settings written down.

All help will be appreciated.

Many thanks,

Eddie

Not sure what you are doing with the switches, maybe you have a diagram?

The Channel macrocell has a slowdown option, so just put the channel macrocell in between the switch and the mixer that does the crow function. Channel Macrocells can be used anywhere in the flow, they are not required to have an real output.

so long ... Uli
http://www.vstabi.de