Hi

In Vplane using two Neos the names of the macrocells disappear when I bind to them with VBCe, bug or normal?

See attached pics.

Thanks

VControl, VBar on all.
TDR, TDR2, TDF, TDS and TDSF
Peter

Hi Peter,

macrocell names are stored in the model folder, on the radio.

So you'd have to copy them to the other radio, via USB>Computer>USB.

Kind regards

Eddi

Born to fly ...
forced to work.

The MC names are stored on the Radio - but also in the MC config file when saving to the radio. They are not stored in the Model itself - so this is why they miss here.

Either copy the config file in the /models folder through USB or save the setup with VBCt, copy through USB to VBCe, Load to model from VBCe - or - as best - copy the whole VBCt throught Cloud to VBCe as we recommend here:

https://www.vstabi.info/forum/read.php?42,196771

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

Thanks RV and Eddi

VControl, VBar on all.
TDR, TDR2, TDF, TDS and TDSF
Peter