Hello Imran,
this can not be done with the current standard wing mixer.
My suggestion would be to create a seperate elevator mixing with macrocells and keep the current flap mixing as it is for the flaps "Only". ;-)
Rough recipe:
- set elevator in wingmixer to +-100, 0 center and no reverse
- create a channel output to the elevator servo at ch1 cell (Center and endpoints/reverse is set here)
- create a mixer cell driven by the ch1 input (is the native elev mix above) and another free mc as input
- create a channel cell (output for the mix above), set the needed delay (as you did for the flaps)
- create a 3-level cell driven by your flap switch, this feeds the channel cell above, dial in 0 for no move and "some" value for move.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.