Hello,
Can someone help me find the setting for mixing a little elevator in with the flaps. I cant seem to figure it out.

Just go to the elevator expert mixer (VBCt long pres, VBC - Expert Mixer) and enter the right value at the "flap" entry.

All input to flaps coming at MC09 will now be used in this ratio at the elevator.

Preconditionally ... take care that the flaps are unidirectional only (starting from 0 to 100 at your switch) and not bidirectional (-100 / 0 / 100). Otherwise the elevator mixer will work in both directions too.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

Thank you, it was the long press that I had overlooked.