setting up evolution optical ignition cut to a switch

I just bought a gas plane and was wondering how to setup the optical ignition kill to a switch on the vcontrol touch. I know i have to use macrocells somehow. Any help would be great.

Thanks
Mike

Thank You
Mike Dawe

So - just use a 3Level Macrocell to the used output socked, assign your switch and values ...

https://uroehr.de/vtube/cat/macrocells-basics/video/04-three-level

https://uroehr.de/vtube/cat/macrocells-basics/video/04-three-level

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

Thanks RV. I thought that might of been all that needed to be done, but thought i would ask before hand.

Thanks Again
Mike

Thank You
Mike Dawe