Flaperons

What's the simplest way to add flaperons to a VPlane setup? The plane has two aileron servos and I would like to have two flap settings (take-off vs landing flaps). It's a STOL plane with long ailerons so it should handle that well.

So I want to use a switch to activate flap settings and retain aileron inputs. I'm know macrocells can do this but wondering if there's an easier way since it's a fairly common setup?

Short recipe - unproven - please check (store setup before):

- in VBCT long press on the regarding outputs in model setup on both
- add a amount of "flap" on both
- the output result of MC09 will now be the input of the flap amount
- set up MC09 and probably some before as likely (e.g. switchable with a multiplexer cell and then one input from a channel cell coming from FC ELEV)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

Thanks Rainer!

I had to translate a bit for non-Touch VBC, but I think I've figured it out. Seems to be working great. Now if you can get this wind storm to die down so I can actually fly it...