Current Sensor Couple Questions

I have the current sensor set up with the battery ID.

I set up the batteries in the vControl. 2x 6s (for 12s) 3000 packs.

When I fly it counts down 90%, 80%, etc. When it says 30% I land.

Here are the questions:
- The battery setup says fly to 30%. But there is the vcontrol does not give a warning when it gets to 30%. It just keeps going. I have it set up so I only to fly to 30%
- When I land the flight summary screen says I only used 50% of the battery. However, it just announced that I used 70%, and my hyperion battery checker says that there is 29% left.

What did I miss in the setup that I do not get a warning? and why is there a difference between the flight summary screen and the telemetry.

Our % Value is the capacity which you want to use!

So - at 0% announcement - the set up 30% are still in the battery.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

Quote:

Our % Value is the capacity which you want to use!

So are you saying that under battery setup / use capacity, where i changed it from 40%/60% to 30%/70%, change it back and all is well? The alarm will work, and all the numbers will match?

Paul

If you tell the setup you want to use 70% of the capacity, then you fly until the announcement/bar-graph say 0%. Set up is relative to the battery, after that it is relative to your flight time.

I programmed my batteries to have 30% remaining in the setup. When I fly I fly until the warning says 0% remaining. After landing and removing the battery my Hyperion checker usually shows 28 or 29% remaining as programmed.

Hi,

a lipo checker calculating only by the current voltage can be off a few percent, which is normal.

I find, on an average balanced pack, that the used capacity and the recharged capacity only differ by a few milliamps ... which is accurate enough

Kind regards

Eddi

Born to fly ...
forced to work.

OK, did exactly what you guys said, and everything worked great!!!!


Thanks.

Now for AR Bailout not lighting up on the Gov status screen. Heard that was a bug though.

Quote:

Now for AR Bailout not lighting up on the Gov status screen. Heard that was a bug though.

Yep - just try it on the bench w/o blades - it will work ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.