Neo - External Sensor Working?

I have a logo 800 with the Vbar Neo with external sensor, Pro and Rescue.

The external sensor is not mounted on the heli yet, but it is hooked to the Neo. When the Neo is powered on, the external sensor lights up, like it should.

I have the heli all set up, using the stock settings and everything is working well, except when I move the external sensor it doesn't adjust the swash.

When I move the heli, the Neo adjusts the swash for the movement.

Is there somewhere I need to enable the sensor?

Yes - there is a menue under Setup - Common ;-)

Default is disabeld.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.