Welcome! Log In Create A New Profile

Advanced

Minimum and maximum collective angles??? confused smiley

Posted by alexvan 
Minimum and maximum collective angles??? confused smiley
May 30, 2014 09:09PM
I haven't understood how does it work the setting of the minimum and maximum collective angles in the non-mikado helis setup. If I push the dial, the values didn't change neither by moving the collective stick neither by rotating the dial.
RV
Re: Minimum and maximum collective angles??? confused smiley
May 30, 2014 09:52PM
If you rotate the dial and access the collective a "Stick" symbol appears - move the stick to full positive for this side adjustment (dial will change this value then), thenn the same on negative.

If ths Stick symbol is still there and you won't get acces - check the collective stick calibration (endpoints) - and afterwards the center calibration. Check the other calibrations too.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Re: Minimum and maximum collective angles??? confused smiley
May 31, 2014 09:01AM
Thanks. It worked.

An other couple of questions:
- Is it normal that the pitch curve isn't -100/100? Has been modified in order to have the requested max/min pitch?
- For the bank 4 is possible only to modify the pitch curve?
- What is the meaning of parameters of the vbar electric governor for not mikado helis?

Thanks.
RV
Re: Minimum and maximum collective angles??? confused smiley
May 31, 2014 02:33PM
1 - yes. setting up the "Over all" collective in setup will change the pitch curve to the new values. So do seperate pitch curves after the basic over all - otherwise they will be reset.

2 - No, just adress bank 4 (Motor switch center) and you can change e.g. agility, gains etc. too.

3 - it will set up gear ratio etc. in the way you are used to do it from 5.3 pro. (i know some things about Mikados - they have a different panel)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Sorry, only registered users may post in this forum.

Click here to login