Macrocell programming for using poti adjustment

Hello,

I’m looking to use Macrocell programming to adjust the Integral gain via a poti. It’s a scale heli I’m tuning with a nodding head.

Anyone got a setup I can use to setup the Macrocell please?
Thks Dave

There is no MC for this.

Having a VBC - just open the Gain and turn a Poti.
Having a VBC touch or EVO - use the "Parameter Modify" app ;-)
But - i think the Integral won't be accesible as it is not the "Common gain".

In this case - just set up a different value each bank and try.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.



Edited 1 time(s). Last edit at 05/31/2023 09:44PM by RV.

Thanks RV, I’m using a VBC touch, so will give it a go



Edited 1 time(s). Last edit at 05/31/2023 09:59PM by Dave the Jeep.