ESC Fan on AUX channel

So I would like to connect the ESC fan (Scorpion TribunusII 6s-120) to AUX channel 1 and then on motor switch Run, trigger AUX channel On so the FAN is only ON when motor is running. How do I do this in VBAR touch?

Regards (EN) / Gruss (DE)

Anders Norlin

Just use a simple 3-Level Macroceell.

But .... there is a option in the "Temperature Switch App"- which monitors the ESC Temp and turns the Fan-ESC on/off automatically ...

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

RV Wrote:
-------------------------------------------------------
> Just use a simple 3-Level Macroceell.
>
> But .... there is a option in the "Temperature
> Switch App"- which monitors the ESC Temp and turns
> the Fan-ESC on/off automatically ...

I will try Macroceell to learn how to use it, just for the fun of it. Thank's.

Regards (EN) / Gruss (DE)

Anders Norlin

Need help how do I configure automatic switch of fan. I can not find any temperature switch app all I can find is in the picture below.

I need one of these
https://www.ebay.com/itm/202467960686

Regards (EN) / Gruss (DE)

Anders Norlin



Edited 1 time(s). Last edit at 10/09/2020 06:17PM by anders_norlin.

This is it - adjust source and thresholds in first one, connect switch/ESC to AUX1.

The switch is the right one - there might be plenty of them out there from various brands.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.



Edited 1 time(s). Last edit at 10/09/2020 08:37PM by RV.

RV Wrote:
-------------------------------------------------------
> This is it - adjust source and thresholds in first
> one, connect switch/ESC to AUX1.
>
> The switch is the right one - there might be
> plenty of them out there from various brands.

What amps are we looking at on one of these fans, I have the 30mm scorpion fan. Is a 1Ah switch enough? Seems to work fine with this switch.

Regards (EN) / Gruss (DE)

Anders Norlin

Hi Anders,

there should be technical data? If in doubt, you can measure it using a Multimeter, or by connecting it to a lab power supply, where you can read the amp draw.

Kind regards

Eddi

Born to fly ...
forced to work.

Eddi E. aus G. Wrote:
-------------------------------------------------------
> Hi Anders,
>
> there should be technical data? If in doubt, you
> can measure it using a Multimeter, or by
> connecting it to a lab power supply, where you can
> read the amp draw.
>
> Kind regards
>
> Eddi

I used the Scorpion telemetric and the amp draw is about 200-250 mAh

Regards (EN) / Gruss (DE)

Anders Norlin



Edited 1 time(s). Last edit at 10/28/2020 05:00PM by anders_norlin.

Hi Anders,

well, that answers the question, doesn't it?



Stay safe!

Eddi

Born to fly ...
forced to work.