Logo 200 extreme vibration level

Hi,

Just hovering the Logo 200 is it normal to get a
19.09.2020 15:41:01 Error;Extreme Vibration Level
in the logs? Now reading the loggs some more I’m guessing it is just the rotor speed startups that gets registered as high vibration levels.

Regards (EN) / Gruss (DE)

Anders Norlin



Edited 1 time(s). Last edit at 09/19/2020 05:17PM by anders_norlin.

Well - i have some of them too. Is it only in Bank1 or also in 2/3?

Are the RPM's the "stock" ones or has been anything changed?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

RV Wrote:
-------------------------------------------------------
> Well - i have some of them too. Is it only in
> Bank1 or also in 2/3?
>
> Are the RPM's the "stock" ones or has been
> anything changed?

Stock settings, nothing changed except update to pro/rescue on Logo batch 2.
This was a hover session in bank 1 with 2 or 3 landings.

Regards (EN) / Gruss (DE)

Anders Norlin



Edited 1 time(s). Last edit at 09/21/2020 07:12AM by anders_norlin.

This was probably caused by the u/i sensor modification I did. Vibration must have been induced by cables and u/i sensor some how. I rearranged how the cables was routed and how I fastened the sensor and no more ”extreme vibration levels” in the log.

20.09.2020 17:44:02 Good;Motorswitch Idle Bailout
20.09.2020 17:44:03 Info;Bank 1 Loaded
20.09.2020 17:44:03 Info;Governor Active
20.09.2020 17:44:03 Good;Motorswitch Motor On
20.09.2020 17:44:07 Info;Governor is at Low Throttle Limit
20.09.2020 17:44:11 Info;Raised Vibration Level
20.09.2020 17:44:21 Info;Raised Vibration Level
20.09.2020 17:44:31 Info;Raised Vibration Level
20.09.2020 17:44:42 Info;Raised Vibration Level
20.09.2020 17:44:52 Info;Bank 2 Loaded
20.09.2020 17:44:52 Info;Raised Vibration Level
20.09.2020 17:45:00 Info;Bank 3 Loaded
20.09.2020 17:45:02 Info;Raised Vibration Level
20.09.2020 17:45:32 Info;Bank 2 Loaded
20.09.2020 17:45:55 Info;Bank 1 Loaded
20.09.2020 17:46:03 Info;Raised Vibration Level
20.09.2020 17:46:13 Info;Raised Vibration Level
20.09.2020 17:46:20 Info;Bank 2 Loaded
20.09.2020 17:46:23 Info;Raised Vibration Level
20.09.2020 17:46:28 Info;Bank 3 Loaded
20.09.2020 17:46:53 Info;Raised Vibration Level
20.09.2020 17:47:00 Info;Bank 2 Loaded
20.09.2020 17:47:04 Info;Raised Vibration Level
20.09.2020 17:47:28 Info;Bank 1 Loaded
20.09.2020 17:47:34 Info;Raised Vibration Level
20.09.2020 17:47:44 Info;Raised Vibration Level
20.09.2020 17:47:46 Info;Bank 2 Loaded
20.09.2020 17:47:50 Info;Bank 3 Loaded
20.09.2020 17:47:54 Info;Raised Vibration Level
20.09.2020 17:48:30 Info;Bank 2 Loaded
20.09.2020 17:48:40 Info;Bank 1 Loaded
20.09.2020 17:48:55 Info;Raised Vibration Level
20.09.2020 17:49:05 Info;Raised Vibration Level
20.09.2020 17:49:14 Info;Bank 2 Loaded
20.09.2020 17:49:15 Info;Raised Vibration Level
20.09.2020 17:49:21 Info;Bank 3 Loaded
20.09.2020 17:49:56 Info;Raised Vibration Level
20.09.2020 17:50:03 Info;Bank 2 Loaded
20.09.2020 17:50:04 Info;Bank 1 Loaded
20.09.2020 17:50:06 Info;Raised Vibration Level
20.09.2020 17:50:07 Info;Bank 4 Loaded
20.09.2020 17:50:08 Info;Governor Idle
20.09.2020 17:50:08 Good;Motorswitch Idle Bailout
20.09.2020 17:50:09 Info;Off - ESC - Umin:10.8V Imax:7.0A Temp:0°
20.09.2020 17:50:09 Info;Governor Stop
20.09.2020 17:50:09 Good;Motorswitch Motor Off
20.09.2020 17:50:16 Info;Raised Vibration Level
20.09.2020 17:50:36;VBar Logfile End -- 20.09.2020 -- 17:50:36

Regards (EN) / Gruss (DE)

Anders Norlin