See current loaded setup in UI

Can I have an item in the UI to see current loaded setup name for my model?

I would also like to add Lightness parameter to the UI, but it's not available.

Regards (EN) / Gruss (DE)

Anders Norlin



Edited 2 time(s). Last edit at 09/16/2020 12:35PM by anders_norlin.

Okay - Lightness could be added.

What will you like to see in this panel from the setup?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.



Edited 1 time(s). Last edit at 09/16/2020 10:24AM by RV.

If I have several setups for a model, like Logo_current, Logo_default I would like to be able to see the name of the setup that is loaded(active) in the display. Just for ease of mind that I'm using correct setup. Just a textfield with the setup name.

Regards (EN) / Gruss (DE)

Anders Norlin

Perhaps rename the model slightly?

I have 730E_F3C, 730E_SPEED, etc.

angeljr Wrote:
-------------------------------------------------------
> Perhaps rename the model slightly?
>
> I have 730E_F3C, 730E_SPEED, etc.


It's just an example and I don't mean model name. I mean the name of the saved/active setup configuration for the model.

Regards (EN) / Gruss (DE)

Anders Norlin

Okay - this isn't stored in the NEO - so i can't assign it. The only thing is to name the model according to its loaded Setup.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

RV Wrote:
-------------------------------------------------------
> Okay - this isn't stored in the NEO - so i can't
> assign it. The only thing is to name the model
> according to its loaded Setup.

Ok so if I load and save setups it is saved/loaded from the cloud on the current model in NEO?

I can have several models with different setups stored on the NEO? Each model can then have different setups assigned to them:
logo_default - setup_default
logo_current - setup_current
logo_test - setup_test

Regards (EN) / Gruss (DE)

Anders Norlin

Quote:

I can have several models with different setups stored on the NEO?

No - only on the VBC. The NEO just loads one setup.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.