Trying to enter a battery in vbar control touch

Hi there

We are just two friend flying helicopters, but we have noticed something weird.
We fly eachothers helicopter and found that when i fly my friends helicopter with
my vbar control touch at startup and binding i can’t select a battery to
fly on mah used with the YGE ESC.
But if my friend fly’s his own helicopter with his own transmitter he gets the
choice of battery’s at startup and binding.
Are we doing something wrong or is this the way it was designed ??

Pease let us now .

Thanks from Amsterdam Sandy and Harry

Have you installed the yge app?

Stephan

Yes sure

Is the battery logbook App installed?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

Yes the logbook app is installed in my friends vbarcontrol the battery choice popps up as soon as he
makes the connection if i trie to do this with my vbar control touch it start the connection to the heli and i can fly the helicopter.
But it does not pop up with the choice of battery(wich i can select)so i cant fly the heli
on mah used like we can if i fly the heli with the vbar control of my friend ????

Hmmm ... i can't find any hurdle here. Could you please uninstall the YGE app and battery lokbook once, then power down/up the VBC and re-install both?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

Preacher Wrote:
-------------------------------------------------------
> Yes the logbook app is installed in my friends
> vbarcontrol the battery choice popps up as soon as
> he
> makes the connection if i trie to do this with my
> vbar control touch it start the connection to the
> heli and i can fly the helicopter.
> But it does not pop up with the choice of
> battery(wich i can select)so i cant fly the heli
> on mah used like we can if i fly the heli with the
> vbar control of my friend ????

You need to install battery logbook on YOUR VBCt as well.

VControl, VBar on all.
TDR, TDR2, TDF, TDS and TDSF
Peter



Edited 1 time(s). Last edit at 05/29/2020 07:17AM by Vinger.