Binder two Vbar Control touch on the same module?

Hello,

With a friend, we both use Vbar control touch with Vbar Neo Vlink modules.

From time to time we would like to be able to try our different machines, however, since we do not fly in the same mode, I would like to know if we could bind two radio stations on the same model?

If yes, you just have to bind? Is there no risk that the two radios will start when the module is switched on?

Thank you

Only one vbar control can be bound to the model but you can switch every flight.

Stephan

Hi,

right, that's like with every 2.4 GHz system. You can bind multiple receivers to one radio, but only one radio to one particular receiver.

Swapping is of course possible (bind and fly, no matter which stick mode or switch configuration, just do a pre-flight the first time to confirm everything works as advertised, especially Rescue or Nitro specific switches (kill/throttle cut), if you have never flown Rescue or Nitro with a particular radio.

Same goes for special functions using macrocells, familiarise yourself with the switch assignments (option switches), check for doubles, set up properly if necessary.

You can also buddy box, with two VBar Controls: just switch on/bind the primary radio, then switch on the secondary radio, go to the buddy box menu, and go to the bind menu again on the primary radio, to bind the buddy radio into the network.

So many options and yet so simple.

Cheers

Eddi

Born to fly ...
forced to work.