Welcome! Log In Create A New Profile

Advanced

Need some help with macrocell setup

Posted by stevin 
Need some help with macrocell setup
February 01, 2020 01:29PM
So a friend of mine that I just got to switch over to vcontrol has a small issue. He ended up coming from jeti and he was used to a push button to kill the motor on the top right above the motor on/off switch so we installed a push button rather then the 3 position switch however he sometimes accidently hits that button in flight causing a minor crash and he has broke a few sets of blades. We were wondering if it is possible to say use macrocells so that anytime the motor switch is in the "ON" position it would disable the motor kill button. Is this possible? if so how would we set this up?
RV
Re: Need some help with macrocell setup
February 02, 2020 11:40PM
Nope - Macrocells can not be porgrammed into our main controls for Motor, Banks, Buddy and Rescue.

Please let him use the switches as they are.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




Edited 1 time(s). Last edit at 02/02/2020 11:43PM by RV.
Re: Need some help with macrocell setup
February 03, 2020 08:06PM
So what about setting a condition so that when throttle is being applied (gov on) the throttle cut is disabled? Is there any way we can make it so that when flying the throttle cut won’t work?
RV
Re: Need some help with macrocell setup
February 03, 2020 10:28PM
No it isn't. What is your intention here?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Re: Need some help with macrocell setup
February 04, 2020 08:49AM
Hi stevin,

in my opinion, throttle cut is the emergency stop switch you always need, in case something goes wrong.

Kind regards

Eddi

Born to fly ...
forced to work.
Re: Need some help with macrocell setup
February 05, 2020 12:12AM
this makes sense and I see why its not possible
Sorry, only registered users may post in this forum.

Click here to login