Reset VBar Control to Factory Defaults

Hi,
I have just bought a VBar Control and Neo from someone.
Is there a way to fully reset it to factory defaults so I do not have his info from his helis in it please. Logs etc.
Effectively if I was to buy it new.

Regards,

Paul

Hi Paul,

just access the internal drive of your (classic) VBar Control, and delete all the plainly visible files and folders on it (there are hidden system folders which will not be deleted, and do not need to be deleted).

Then, name the radio you want it to be named, and make the stick and switch assignments, job done.

On a factory new radio, it's no different.

Kind regards

Eddi

Born to fly ...
forced to work.

Thanks Eddi,
What about the bound models? Can they be erased?

Regards,
Paul

Why?, there is no reason to do that.

Stephan

PMFH Wrote:
-------------------------------------------------------
> Thanks Eddi,
> What about the bound models? Can they be erased?
>
> Regards,
> Paul


If you delete all the visible folders as Eddi quoted above all models will be erased.

Hi Paul,

in fact, there is no model memory in VBar Control, only saved setups (for backup purposes, or to transfer them to a computer or a different VBar).
All model memory is in the respective VBar.

So if you delete everything, also the back upped files will be gone, all clear.

Kind regards

Eddi

Born to fly ...
forced to work.

Thank you all for your replies.

Its like a mobile phone, I would not want someone elses texts or phone numbers!
I wanted a fresh start.

Thanks again

P.

Hi P.,

well, the only thing left would be the transmitter name if you delete the contents of it's internal disk.

Cheers

Eddi

Born to fly ...
forced to work.

how can i access the internal drive on old vbar control to reset the name?

Hi,

you can't. See other post

On the internal drive, there are backup'd setups, logs, screenshots.

—Eddi

Born to fly ...
forced to work.

so, how can i change or erase the name on the main screen?

Just in the transmitter setup panels ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

Translitter Setup, Assign and Calibrate, TX name.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.