malfunction

A Vcontrol alarm went off, it wont connect to any of my neo receivers. The receivers are flashing red and the swash is going up and down on 4 different neo receivers. Is this serious?

Richard



Edited 1 time(s). Last edit at 06/22/2018 12:46AM by heliflyer6.

Hi Richard,

depends. Can you please check the log file(s) and/or attach them here? VBar / VBar Control wants to tell you something, and this must be considered serious until we know what it is.

Kind regards

Eddi

Born to fly ...
forced to work.

Thanks for the reply, im faily new at this, so i dont know how to attach files from the radio.

Hi,

. connect VBar Control to your computer
. access the removable drive which turns up
. go to the logs folder, locate the model (by name)
. copy the whole folder or single log files to your computer
. zip and attach here (or attach single files)

You can read the logs with any text editor, so you can check what's relevant, what should be the logs from the flights or power-ons in question.
if in doubt, zip and attach the whole folder so we can check.

Kind regards

Eddi

Born to fly ...
forced to work.

(Ambiguous value on elevator rc channel), This is what was in the file.

That message is in the file on all four of my helis.

Also found this, Init Failed, retrying

VBar Start -- N7 -- 22.06.2018 -- 17:30:24
17:30:25;1;Reset Reason: Power On
17:30:25;2;External Gyro Sensor detected and working
17:30:25;2;Governor in Motortune Mode
17:30:28;2;Calibration Finished
17:30:28;3;Ambiguous Value on Elevator RC Channel at Init
VBar Logfile End -- 22.06.2018 -- 17:30:36

Bar Start -- N556 -- 23.06.2018 -- 14:32:01
14:32:02;2;Bank 2 Loaded
14:32:02;3;The Cyclic Ring is active
14:32:02;2;Governor Stop
14:32:02;2;Governor in Motortune Mode
14:32:03;2;Calibration Finished
14:32:03;3;Ambiguous Value on Elevator RC Channel at Init
VBar Logfile End -- 23.06.2018 -- 14:32:20

Bar Start -- 516 -- 22.06.2018 -- 17:40:49
17:40:50;1;Reset Reason: Power On
17:40:54;2;Calibration Finished
17:40:54;3;Ambiguous Value on Elevator RC Channel at Init
VBar Logfile End -- 22.06.2018 -- 17:40:58

Please check VBC stick calibration - might be off.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.