Eddi E. aus G. Wrote:
-------------------------------------------------------
> Hi Andrew,
>
> you will need either a different shaft for the
> motor or a different bearing/lower bearing support
> with different bearing, for the 8 mm shaft.
>
> Kind regards
>
> Eddi
Hi Eddie
thanks for getting back to me so quickly .
will part number MIK 4545 fit in the new 700 or can be modified to fit ?
if not , can you tell me what i should use please.
Thank you
Kind regards
Andrew
Edited 1 time(s). Last edit at 07/06/2016 11:01AM by Fasster.