New Logo 700 14S

Hi Mikado Team

I would like to run 14S 4400's in my new Logo 700 with 717 Vtx's (mainly big fast air and some mild 3D)

The motor has an 8MM shaft .I'm planning on the Pyro 800-48 Comp with long shaft 55mm.



What parts do i need to order besides XXtreme main gear ,one way hub and pinion to suit ?

do i need any other parts like the lower bearing support plate ?


I do understand that it is more than capable on 12S but i only have 14S Lipo's and with my flying style this may suit me better.

Thank you
Andrew



Edited 1 time(s). Last edit at 07/06/2016 03:02AM by Fasster.

Hi Andrew,

you will need either a different shaft for the motor or a different bearing/lower bearing support with different bearing, for the 8 mm shaft.

Kind regards

Eddi

Born to fly ...
forced to work.

Eddi E. aus G. Wrote:
-------------------------------------------------------
> Hi Andrew,
>
> you will need either a different shaft for the
> motor or a different bearing/lower bearing support
> with different bearing, for the 8 mm shaft.
>
> Kind regards
>
> Eddi


Hi Eddie

thanks for getting back to me so quickly .

will part number MIK 4545 fit in the new 700 or can be modified to fit ?

if not , can you tell me what i should use please.

Thank you

Kind regards
Andrew



Edited 1 time(s). Last edit at 07/06/2016 11:01AM by Fasster.

Hi Andrew,

we will offer a part which fits in the near future, the one from the XX will not fit.

Kind regards

Eddi

Born to fly ...
forced to work.

HI Eddie


Thank you

Kind regards
Andrew

H



Edited 1 time(s). Last edit at 08/10/2022 08:29PM by Pit100.