Logo 700 Canopy Posts - washers and lock pin?

Hello Eddie,

I saw on your pictures here:

http://www.vstabi.info/en/node/1968

Please also see image attached.

Where can I get the washers you use between the frame and the canopy post?

And also, where can I get the canopy post you have, with a safty pin at the end so the canopy won't come off?

I've installed my canopy on my logo 700 as it comes stock, but the canopy is closer to the swash in one side, so much closer that the one of the links that go from the swash to the servos is acutally hitting and denting the canopy!

I'm araid that this would cause a failure in flight and/or letting the canopy loose and cause the heli to come down...

How can I adjust that and or change the canopy post ocnfiguration to make it work?

I thought of putting extra washers like you did in the back to try to make the canopy stick farther out ffrom the link that's hitting it... any feedback would be greatly appreciated!

Cheers,

Flipper76

Well - it is my Logo 800 ;-)

I have used the pplastic washers from a old Logo 500 kit:

http://shop.mikado-heli.de/LOGO-Helicopters/LOGO-550-SE/Spareparts-Chassis/Canopy-holders-LOGO-500-550.htm?shop=k_mikado_e&SessionId=&a=article&ProdNr=04102&t=7567&c=7093&p=7093

But any other shins would be fine enough ;-)

I had to drill new holes in the frames (in case of the bend holders now)


Here the 800's:

http://shop.mikado-heli.de/LOGO-Helicopters/LOGO-800-XXTREME/Spareparts-Chassis/Canopy-mounting-parts-LOGO-800-XXtreme.htm?shop=k_mikado_e&SessionId=&a=article&ProdNr=04557&t=7567&c=6213&p=6213

(i don't see the clips and holes there - ans also don't know if they fit to a 700 - maybe Eddi must check!)



Unfortunately i didn't find the clips in the shop anymore - but they are standard RC-Car ones with a old Logo 500 main head dampening rubber ring ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.