Welcome! Log In Create A New Profile

Advanced

Logo 200 Pro + Rescue settings

Posted by JamesM72 
Logo 200 Pro + Rescue settings
June 02, 2024 04:25PM
Hello All,

I have purchased a second hand Logo 200 which has the Pro Rescue upgrade.
Is it possible / advisable to reset this to the standard configuration?

As a new pilot I’m not comfortable using my touch radio to setup the mini neo and would like the simplicity of the “ready to fly” setup.

Thanks
James
RV
Re: Logo 200 Pro + Rescue settings
June 02, 2024 07:35PM
You need to do this 3 steps:

- write down swash servo trims (long press on trim) in setup, write down trim flight valiues in flight menue
- create a new model setup with the logo 200 preset given in VBC
- dial in the named values above again

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Re: Logo 200 Pro + Rescue settings
June 20, 2024 05:50PM
Thank you Rainer, are these settings found once connected to the Logo 200 ?
Do I also need to be connected to the Logo 200 to be able to find create a new model setting on vbarT ?
Re: Logo 200 Pro + Rescue settings
June 21, 2024 08:54AM
Hi,

you always need to have the model connected which you want to work on.
The model memory _is_ the model, the VBar on the model.

This of course also goes for creating a new setup.

Free yourself from the 'old' :-) thinking that the transmitter itself has model memory—it hasn't.
Actually one of the key benefits of the VBar system, this way, you can share models, buddy box, use different transmitters of your own, even with different stick modes and switch positions, without having to think about transferring model memory or settings, and without the risk of having the wrong model memory loaded.

Kind regards

Eddi

Born to fly ...
forced to work.
Sorry, only registered users may post in this forum.

Click here to login