Logo 550sx Jesus bolt

Hello,

Does the Jesus bolt (the screw securing the main shaft) on a Logo 550sx just go through the main shaft without any nut on the other end of the rotor head? And according to the manual it does not need any locktight - is that correct?

I've attached a photo of my build for illustration.

Many thanks,

Darko

I use always a Loctite for the Jesus bolt on a non-self-securing thread.
If it is fixed with a self-securing nut (must be fullfilled and new) loctite isn't necessary.

The Logo 550 Yoke has a thread, does it?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.