Welcome! Log In Create A New Profile

Advanced

VBAR not binding/online updates

Posted by mpbiga135 
VBAR not binding/online updates
July 31, 2021 11:50PM
I purchased a used VBAR, its registered to me now. Will be using a Spektrum DX-18 w/two DSMX Satellites. I did a regressive firmware update as previous owner had it updated to his VBAR Controller. When I go to online updates, it won't allow. Please advise on how to rectify this? I believe it may be locked? Also, under my devices, what is Options tab really do other than list what version it has, is this actual VBAR settings saved, or when you go down to "download recovery software" or only if you saved under program manager?
SN is 1410042401

much thanks,

matt



Edited 1 time(s). Last edit at 07/31/2021 11:56PM by mpbiga135.
RV
Re: VBAR not binding/online updates
August 01, 2021 12:47AM
As this is a old V5 Vbar i will move this thread into the V5 Archive section in a few days.

This Forum is for Questions about the VTV streams ;-)

The VBar was loaded with a V6 (whic is ONLY for VBC and disables USB ... ). So to use it with 3rd party transmitters:

- load recovery
- request license key / use it
- load V5.3 online
- check/redo setup

Videos can be found in the V5 Archive as playlists:
https://www.vstabi.info/en/v5_videos

Or single Videos:
https://uroehr.de/vtube/cat/old-v5-vbars-archive-

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




Edited 1 time(s). Last edit at 08/01/2021 12:48AM by RV.
Re: VBAR not binding/online updates
August 01, 2021 01:04AM
My bad, didn’t realize I was under a Specific forum topic. Thanks for info.

Matt
RV
Re: VBAR not binding/online updates
August 01, 2021 10:12AM
Does it work now?

If yes - i'll move the thread, if not it stays here unless solved ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Sorry, only registered users may post in this forum.

Click here to login