Mini Vbar - "No Connection"

I bought a Mini VBar 5.3 (with Pro, 6 software) used and initially was able to connect it and register it to my account etc however had no immediate need for it so stored it. A few days ago, I was going to install it into a new model and to my surprise have been unable to connect it to VBar Control manager or Vstabi? I get a green USB connected icon but a red "No Connection".

I've tried:
- Various USB cables
- Uninstalled and re-loaded drivers various times (on both MacOS and Windows 7 via Parallels)
- Port /dev/cu.SLAB_USBtoUART IS selected on VStabi 5.3

I have tested connections etc with my other 3 Neos which are all working as they should so there must be something wrong with this Mini VBar...? The serial number is 1520001469.

I have been able to bind it to my Touch Control and set it up however it is through the basic vbar app and I don't seem to have "Rescue" available despite the Mini VBar having PRO on it?

Help please????

Thanks,

Miguel

- a legacy device with V6 CAN NOT be used with USB - it is for VBC use only. For update etc- use recovery procedure, reload required firmware, see my Videos in the VBC section or in V5 archive.
- Rescue is ONLY available on a NEO.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

Thank you Rainer, those were all the answers to my questions In which case the Mini vbar is working well but Ill need to get another Neo for the Rescue features...

Thanks again!