After assembling my Logo 600 V3 SE with everything stock, i am seeing tail wag on all RPMs.
Here is the config:
All stock parts including stock blades.
Neo controller with Vbar control TX
Tail servo : Futaba BLS274SV
Flew on 4000 12S and 3300 12S but the same thing happens.
Motor is a SCORPION HKIV-4035-450KV running 12T Pinion.
The video however is when i was flying on a 4000 6S lipo.
Links:
https://youtu.be/Asb1ySzbPNY
https://youtu.be/W3TuOnkZEGI
Tailset up video:
https://youtu.be/Hrt-pgqTiB0
https://youtu.be/ZR52e6NaEhI
Any idea what could be causing this ?
We put on a 600 Size Hirobo tail from a old heli and it was flawless, moreover damaged the original tail grip while trying to disassemble it to check what was wrong.
Ordered a brand new tail grip assembly and this is from the maiden flight.
Edited 1 time(s). Last edit at 05/03/2019 05:47AM by glennj.