Trex 700fl with neo head shake

I have just put a neo with pro software on my trex 700e with fl head when fly around normaly it fine but when you do a sharp aileron input i then center the stick the head shakes i tried lowering the head gain but made no differents any ideas

Please add more infos, the headspeed, dampening, blades, used components like servos etc. - and the setup file of the NEO ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.

Align 700mm blades ,dfc dampers,fl head non dfc align bls815hv cylic 8 degress is 98percent and pitch is 79 percent 11 degress

Hi,

the setup file would still be of interest, especially the optimizer values in relation to the set agility.

Would you mind saving it from your VBar and attaching it here?

Kind regards

Eddi

Born to fly ...
forced to work.