T-Rex 450 Sport and VBar Governor

I decided to pull out the Kontronik Jazz ESC from my T-Rex 450 and convert to a VBar Gov proven ESC.

I used the Hacker X-70 ESC which is proven in my Logo 400 with a special firmware (download on www.hacker-motor.com).

The ESC settings are Gov off, Stick control off, 8 kHz

My T8 has 2 configured switches - i use this model memory for every electric heli - never needed to change here ;-)

SG to pilot: Motor off (Bank0)
SG mid pos: Bailout (Bank0)
SG back: Headspeed controlled by SE (Bank1..3)

SE back: 2900 RPM, Bank1
SE mid: 3050, Bank2
SE to pilot: 3200, Bank3

See the attached image, setup file and T8 file (V5)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.



Edited 1 time(s). Last edit at 08/08/2012 05:51PM by RV.