Kyle Stacy Goblin with Vbar Control and Neo .. Need setup help

Hi

I am desperate for help on setting up pitch etc as it seems that my previous experience with setting up helis is now irrelevant.
My swash is level but I need to know how to setup for 3 blades.
When I set 0 deg pitch which blade does the pitch gauge need to be on in relation to the tail (90 deg to the right?)
When I set pos and neg collective does the pitch gauge go on the blade in the same position?
Finally .. where do I measure for cyclic pos and neg?

Please help

Thanks in advance.
Paul

Hi Paul,

0 deg, just fold two of the three blades and see if they are in track.

Max. collective, move one blade over the tail, so the possible forward slant of the skids does not affect the angle. Still, calibrate your pitch gauge to zero there (at the 0 deg collective position).

Cyclic, the same as with two blades.

Just make sure that the swash plate rotation is OK in the first place, then the blades will behave the same as on a two bladed head.

Kind regards

Eddi

Born to fly ...
forced to work.