Hi,
on the road map, yes, kind of, means we are discussing it now and then, but not in the way of around the next couple of corners of the road map.
Smallest and almost least costly thing you could do is use a VBasic and strip it of the case and the pin header board, then connect the servo signal wires directly, and shrink-wrap it.
Of course you can also use a Pro/VPlane.
Or you could use a Mini VBar (no extra costs if you have one in the tool box anyway) and an RX Sat, also strip both of the case and shrink-wrap it.
Kind regards
Eddi
Born to fly ...
forced to work.