New one way for LOGO 690 SX
Posted by Eddi E. aus G.
|
July 25, 2014 12:26PM |
Dear customers!
The new one way bearings for the 690 SX are being shipped.
They now also contain two one way bearings, which increases the load capacity by an additional 30 %.
All 690 SX-customers will get a replacement directly or via their dealership, free of charge.
In case you do not receive a replacement in the next few days, please come back to your dealership or to us (with proof of purchase).
To demonstrate the performance, we have taken a little video.
The power consumption for different maneuvers was documented using the voltage/current sensor of VBar Control.
The factory recommendation for max. rpm (also defined by the power train and gear ratio) and for maximum collective pitch angles remain.
Exceeding the recommendation will not inevitably lead to the destruction of the model, but it happens at your own discretion and at your own risk.
Please accept our apologies for the delay. Now have fun with your new LOGO helicopter!
Edward Eckstein
Born to fly ...
forced to work.
The new one way bearings for the 690 SX are being shipped.
They now also contain two one way bearings, which increases the load capacity by an additional 30 %.
All 690 SX-customers will get a replacement directly or via their dealership, free of charge.
In case you do not receive a replacement in the next few days, please come back to your dealership or to us (with proof of purchase).
To demonstrate the performance, we have taken a little video.
The power consumption for different maneuvers was documented using the voltage/current sensor of VBar Control.
The factory recommendation for max. rpm (also defined by the power train and gear ratio) and for maximum collective pitch angles remain.
Exceeding the recommendation will not inevitably lead to the destruction of the model, but it happens at your own discretion and at your own risk.
Please accept our apologies for the delay. Now have fun with your new LOGO helicopter!
Edward Eckstein
Born to fly ...
forced to work.
Sorry, you can't reply to this topic. It has been closed.